60cm Fibre Optic Christmas Tree

60cm Fibre Optic Christmas Tree

• For indoor use only
• With 1500 to 2000 hour of bulb life
• With extra fibre optic lights
• Automatic quick multi changing colours of fibre optic lights
• Instructions on packaging
• ADAPTER INCLUDED

The replacement bulb

• Disconnect the adapter from the tree

To replace the bulb unscrew three screws on the top or side of tree base, remove the top of the base, to remove colour disk, unscrew nut from its top, you will find two springs holding the bulb down, pull the springs upwards by using a suitable tool like pliers. Take out the bulb by pulling it upwards and replace with the new bulb. Replace the two springs onto the bulb as before. place colour disk in its position, and tighten with nut. Secure the base by replacing three screws at the top or side of the base.

Bulb and adapter replacement

CAUTION

Replace the bulb with one of the same voltage, wattage and size as originally installed in the same product. This product operates with a 12V 12VA isolating transformer plug to BSEN61558, replacement only with the same. Bulb voltage, wattage  12V,100W. Adapter power supply input 230 to 240V  50Hz. Output 12V 12VA.

NOTE We will not accept returns on Christmas Lights and Decorations after the 24th December at 6pm